Table of Contents
- What Bitcoin Has to Do With Ransomware
- Should You Pay?
- Major Ransomware Types
- Attack Vectors
- What to Do After You’ve Been Infected
- Mitigation Methods
What is Ransomware
Ransomware is malware that encrypts a victim’s data, extorting a ransom to be paid within a short time frame or risk losing all his files – has been around for quite some time. In 1989 the first known ransomware, dubbed the AIDS Trojan, infected 20,000 floppy diskettes –remember those? The diskettes supposedly contained AIDS information on the virus and were handed out during a conference. Upon loading the DOS-based software from the disk, the program counted the number of times the computer was rebooted. Once it reached 90, it would hide the directories, encrypt the names of the files and requested $189.00 to decrypt the files.
How Ransomware Works
Ransomware works by marrying three separate functions:
Different ransomware strains spread via different means. This may include any combination of drive-by malware ads, spreading via document macros, or leveraging operating system or application vulnerabilities.
2. Holding Data Hostage
Similiarly, each ransomware strain has a different method of removing data from the infected system’s control. In many cases, the data is actually encrypted, but it is just as likely that it’s deleted and a file of garbage bit left in its place.
3. Digital Payment
Once the files are out of the users’ control, payment of some kind is requested. While Bitcoin (and other cryptocurrencies) are often used as a direct form of payment, indirect methods of payment like deliberately spreading the ransomware to within a company, downloading a digital good or other payments in kind have also been reported.
Together, these three functions define any strain of malware.
Who is the Target of Ransomware?
Most ransomware reports are of large companies that have been brought to their knees by a ransomware attack. However in most cases ransomware spreads indiscriminately.
It is an equal opportunity attack affecting businesses of all sizes, government agencies and personal computing devices indiscriminately.
Ransomware is a means of monetizing a vulnerability found in an organization’s application or network infrastructure. Who’s the target? Everybody.
Ransomware has evolved from its early sneaker-net roots, leveraging the Internet and email to spread to different computers. However, it still follows a predictable script, not all that different from the original AIDS Trojan. After entering our networks via a phishing attack, files get encrypted, and the user sees a notification with instructions on how to submit bitcoins in order to decrypt files.
Unfortunately, ransomware attackers have seen how lucrative ransom payments can be. With each attack worth hundreds to thousands of dollars or more, they’ve become even more ambitious with the amount they’re demanding, and how they’re demanding it.
How’s this for ambition: some attackers, even after you’ve paid them the ransom, only partially unlock the files in an effort to demand even more from vulnerable businesses. In one case, a hacker even demanded a ransom as high as one million dollars.
They’re also pushing the boundaries to see how quickly they’re able to extort from unprepared individuals and organizations. Recently, we were introduced to a different attack vector with WannaCry. Instead of a phishing attack, attackers used the NSA’s ETERNALBLUE exploit, allowing it to spread peer-to-peer within an organization, impacting vulnerable Windows machines – laptops, desktops, tablets, and servers.
The result? WannaCry was the fastest and largest ransomware attack we’ve seen so far. However, some security experts are already debating whether the latest NotPetya attack is even deadlier than WannaCry.
By experimenting with how an attack is released, how much to extort, the intensity and velocity in which they spread harm, hackers advance their knowledge base, changing how they develop new strains as well their attack vector.
What hasn’t changed is that it is still possible to detect and prevent a zero-day ransomware attack – that’s according to a Northeastern University ransomware research paper. In Cutting the Gordian Knot: A Look Under the Hood of Ransomware Attacks, this research team analyzed 1,359 ransomware samples between 2006 and 2014, and found that a “close examination on the file system activities of multiple ransomware samples suggests that by… protecting Master File Table (MFT) in the NTFS file system, it is possible to detect and prevent a significant number of zero-day ransomware attacks.”
Bitcoin and Ransomware
Bitcoin is often associated with ransomware because attackers typically request payments to be submitted in that form of currency. But what exactly is bitcoin?
Bitcoin is a cryptocurrency that with some effort lets you semi-anonymously buy goods and services. You can send bitcoins digitally using a mobile phone app or computer. It’s not quite as easy as swiping a credit card, but removes a large amount of risk from the receiver.
Bitcoins are stored in a digital wallet, which resides in the cloud or on a user’s computer. It’s similar to a bank account, but they’re not insured by the FDIC. Also, bitcoins aren’t tied to any country, subject to regulation, and there are no credit card fees.
Each bitcoin transaction is on a public log. Names of buyers and sellers are anonymous – only their wallet IDs are revealed. And it allows buyers or sellers do business without easily tracing it back to them. As a result, it’s become a popular choice for cybercriminals to choose bitcoin as a form of payment. To evade identification, many bitcoin addresses used by cybercriminals have no more than 6 transactions.
To make a bitcoin payment, victims are often alerted to download anonymous browsers, such as Tor2web or Torproject, in order to visit a URL hosted on anonymous servers. Tor (The Onion Router) makes it difficult to trace the location of the server or the identity of its operators.
Ransomware: Should You Pay?
The short answer is: it depends.
But Some Say, Yes
At a Cybersecurity Summit, Joseph Bonavolonta, the Assistant Special Agent in charge of the FBI’s CYBER and Counterintelligence Program said, “To be honest, we often advise people just to pay the ransom.”
He explained, “The success of the ransomware ends up benefitting victims: because so many people pay, the malware authors are less inclined to wring excess profit out of any single victim, keeping ransoms low. And most ransomware scammers are good to their word. You do get your access back.”
If you pay, the FBI stated that most ransomware payments are typically between $200 and $10,000.
But there have been instances where the payment has been much higher. In 2014, the City of Detroit’s files were encrypted and the attackers demanded a ransom of 2,000 bitcoins, worth about $800,000. Luckily, the ransom was not paid because the database wasn’t used or needed.
There might be times when you’re faced with other considerations. The Tennessee Dickson County Sheriff’s Office paid $622.00 in bitcoin to hackers who encrypted the department’s criminal case files, making them inaccessible to investigators. Detective Jeff McCliss said, “It really came down to a choice between losing all of that data – and being unable to provide the vital services that that data would’ve assisted us in providing the community versus spending 600-and-some-odd dollars to retrieve the data.” The department was lucky; it got back access to its files.
Thou Shall Not Pay
Some security experts disagree with Mr. Bonavolonta’s remarks and urge you not to pay the ransom because there’s no guarantee that even after you pay the ransom, your files will return to its original state. Moreover, paying perpetuates an ongoing problem, making you a target for more malware.
In 2016 it was reported that a Kansas hospital hit with ransomware paid the ransom in hopes of getting back to business as soon as possible, but the payment only partially decrypted their files. Instead, the cybercriminals demanded more money to decrypt the rest. As a result, the hospital refused to pay the second ransom because it was no longer “a wise maneuver or strategy.”
Worse, if you get infected with a defective strain such as Power Worm you won’t get your files back regardless what you do. Even with the intent of paying the ransom, this attack will inevitably destroy the victim’s data during the encryption of their data.
Alternatively, if you encounter an attack like NotPetya where the intention wasn’t about financial gain, but destroying data, even if you stockpile bitcoins to pay the ransom, you won’t get your data back.
The Department of Homeland Security has also advised victims not to negotiate with hackers. Conflicting advice has prompted a debate about whether the FBI is encouraging behavior that will lead to more hacking.
In a Wall Street Journal interview, FBI spokeswoman Kristen Setera CryptoWall have a reputation for being strong encryption ransomware. Encryption is the process of applying an algorithm (also known as ciphers) to data so it is unintelligible to anyone. And to decrypt the data, you’ll need keys. There are two types: symmetric and public.
Advanced Encryption Standard (AES), Rivest Cipher 4 (RC4), and Data Standard Encryption Standard (DES) are examples of a symmetric-key algorithm. With symmetric, the same key is used for both encryption and decryption. It’s only effective when the symmetric key is kept secret by the two parties involved.
Public Keys (Asymmetrical Key)
Rivest, Shamir, & Aldeman use two different keys in their famous RSA algorithm. A public key that everyone has access to, and a private key that is controlled by the person who you wish to communicate with.
Strength of an Encryption
To understand the strength of the encryption, you have to look at both the type of encryption being used –whether symmetric or public/asymmetric – and the key length.
Two important facts: the longer the key, the stronger the encryption, and key length is measured in bits.
Breaking an Encryption
For a symmetric algorithm, you’ll need a couple of hours of computer time for something like a 20-bit key or years for a 128-bit key (2128 = 340282366920938463463374607431768211456 possible keys of 128-bits)
For a public key algorithm, a key length of 32-bits would only require 232 combinations. Even a 512-bit can be easily broken (within a few months), but 2,048-bit is far harder.
Comparing public and symmetric keys can be confusing. Here’s a rough benchmark: a 350-bit RSA key is roughly considered the same strength to 40-bit RC4, and 512-bit AES.
The wonky reasons for these differences in key-breaking speeds has to do with the fact that in RSA, you have to factor a number—don’t ask!
The first ransomware variants used a symmetric-key algorithm and eventually upgraded to public-keys. Today, more advanced ransomware use a combination of symmetric and public.
Most cybercriminals probably wouldn’t use a public key to encrypt large file system because it is much slower than a symmetric key encryption. And taking too long to encrypt files could thwart the ransomware operation before the encryption process is fully completed.
So a better idea is to use symmetric techniques to quickly encode the file data, and asymmetric to encode the key. In CryptoLocker, for example, AES (symmetric) was used for file encryption and RSA (public) for AES key encryption.
Another blend you might see in the near future is elliptical curve cryptography (ECC) and RSA. ECC is described as the next generation of a public key, in which you can create faster, smaller, and more efficient cryptographic keys. Some researchers say that ECC can yield a level of security with a 164-bit key that other systems require a 1,024-bit key to achieve.
With deletion, attackers threaten and warn: any of your attempts to decrypt files would only result in an “irrevocable loss of your data.” Or if you don’t pay, the files get deleted. Popular examples of deletion include Gpcode and FileCoder.
Typically when we delete something, we wipe it off the disk. But in analyzing all the samples, the researchers learned that lots of data remained on disk because attackers were lazy, often choosing the easiest path. However, they’re also very clever. The researchers found that while the NTFS Master File Table indicated that files were deleted, the files were actually still on disk, so recovery is potentially possible. However, depending on the strain and how ransomware evolves, there’s also the potential that your data might be destroyed.
With locking, attackers create a new login screen or html page that makes it appear as though a law enforcement agency has taken over the computer. They display a warning pertaining to laws such as copyrighted materials or child pornography. Or they might disable other components, typically keyboard shortcuts. Examples include Winlock and Urausy.
Ransomware Attack Vectors
You can bet that new types of ransomware are constantly being developed, including attack vectors that aren’t like the usual garden variety, such as malvertising, ransomworm, and peer-to-peer file transfer programs.
As I was once reminded by a security pro, attacks don’t need to be complicated. It can be something as simple as a link in an email or an email attachment and that’s what most ransomware strains rely on to get in your network. Therefore curious individuals who can’t resist clicking on links or opening attachments would benefit from security awareness training.
We’re also seeing more instances of Ransomware-as-a-Service, where hackers sell their malware to other cybercriminals, increasing the frequency and reach of ransomware. Ransomware authors can enlist anyone to sign up and everyone would earn a percentage of the profits. To combat this problem, organizations might benefit from a few mitigation strategies, which we’ll cover later.
What to Do After You’ve Been Infected with Ransomware
Most people don’t realize they’ve been infected until their screen displays a ransom note, notifying them that their files have been encrypted.
If you discover that your computer has been infected:
- Shutdown your computer or disconnect from the network.
- If you’ve decided against paying the ransom, scan your computer with an anti-virus or anti-malware program and let it remove everything.
- If you have a backup, restore your files.
- If you don’t have a backup, check if it’s possible to identify the ransomware strain from the encrypted files or note. If it is and a decryption or recovery tool is available, use that.
- Identify how the infection occurred and what you need to do prevent a recurrence.
One caveat is that backups aren’t 100% fail safe. Some ransomware strains will either encrypt your backups or worse, hide in your backups so that after you restore files they will attack again.
However, if you decide to pay the ransom, you have our sympathy! We empathize and understand what a pain it must have been and hope that once you pay, all your files get decrypted. Don’t forget to scan your computer with an anti-virus or anti-malware program and let it remove everything. Also, review the mitigation methods below!
The term ransomware defines a group of malware by its behavior. As such, it’s difficult to apply a one size fits all strategy to remove an infection. In some cases, like where weak or missing API credentials are compromised, there may not actually be an infection. An example of this occurred when tens of thousands of MongoDB databases had their data encrypted remotely as they had failed to change the default password 10.
The best policy to pursue is one of identification and then mitigation.
Ransomware Mitigation Methods
Monitor File System Activity
After looking at 1,359 ransomware samples, the Northeastern University researchers learned that it is possible to stop a large number of ransomware attacks, even those using deletion and encryption capabilities.
Significant changes occur in the file system (i.e., large number of deletions in the log) when the system is under attack. By closely monitoring the file system logs and configuring your monitoring solution to trigger an alert when this behavior is observed, you can detect the creation, encryption, or deletion of files.
User Behavior Analytics or Signature-Based?
Some IT pros have turned to endpoint security solutions in the hope that it will detect and stop crypto-malware. However, the industry is catching on to the fact that, as one observer put it, “signature-based antivirus software that most organizations still rely on to defend them can’t cope with modern attacks.”
A recent CIO article described the drawback best:
“… while a signature-based approach reduces the performance hit to the systems on which it runs, it also means somebody has to be the sacrificial sheep. Somebody has to get infected by a piece of malware so that it can be identified, analyzed and other folks protected against it. And in the meantime, the malefactors can create new malware that signature-based defenses can’t defend against.”
Bottom line: endpoint security solutions can’t block unknown ransomware variants by, for example, blacklisting connections to a current (but outdated) list of C&C servers. They’re also bound to a device/user/process, and so don’t provide any anti-heuristics or debugging techniques.
Instead, User Behavior Analytics (UBA) has become an essential go-to ransomware prevention measure. It’s also been known to detect zero-day ransomware attacks as well.
Defending the inside from legitimate users is just not part of the equation for perimeter-based security, and hackers are easily able to go around the perimeter and get inside. They entered through legitimate public ports (email, web, login) and then gain access as users.
Once in, cybercriminals have become clever at implementing a ransomware attack that isn’t spotted by anti-virus software.
In fact, to an IT admin who is just monitoring their system activity, the attackers appear as just another user.
And that’s why you need UBA!
UBA really excels at handling the unknown. In the background, the UBA engine can baseline each user’s normal activity, and then spot variances and report in real time – in whatever form they reveal themselves. For instance, an IT admin can configure a rule to, say, spot thousands of “file modify” actions in a short time window.
UBA takes a cross-system approach, too. i.e., it can notice abnormal file behavior combined with weird email actions combined with weird login behavior (from Active Directory). Think of UBA as File System Monitoring 2.0 – and keep in mind that the best UBA benefits from having the most context.
Cybercriminal may avoid encrypting all files and start by encrypting recently accessed files. Create a decoy by creating fake files and folders and monitor regularly.
This is also a good method for organizations that don’t have an automated solution to monitor file access activity. That also means you might be forced to enable file system native auditing. However, it, unfortunately, taxes your monitored systems. Instead, prioritize sensitive areas and set up a file share honeypot.
A file share honeypot is an accessible file share that contains files that look normal or valuable, but in reality are fake. As no legitimate user activity should be associated with a honeypot file share, any activity observed should be scrutinized carefully. If you’re stuck with manual methods, you’ll need to enable native auditing to record access activity, and create a script to alert you when events are written to the security event log (e.g. using
Least Privilege Model
Another approach is to control access to data and work towards achieving the least privilege model. Your goal is to reduce exposure quickly by removing unnecessary global access groups from access control lists. Groups such as “Everyone,” “Authenticated Users,” and “Domain Users” when used on data containers (like folders and SharePoint sites) can expose entire hierarchies to all users in a company. In addition to being easy targets for theft or misuse, these exposed data sets are very likely to be damaged in a malware attack. On file servers, these folders are known as “open shares”— where both file system and sharing permissions are accessible via a global access group.
With the rise of ransomware toolkits (prepacked bits of code for the various ransomware functions) it’s become harder to differentiate between Ransomware strains.
|CryptoLocker||One of the earlier and quintessential ransomware strains. Among the first to demand payment via Bitcoin. Distinguished by it’s good “customer service” and the fact it did actually decrypt your files.|
|Petya/NotPetya||Strain was spread through a vulnerability in a web based accounting system used by Eastern European companies. Notable becasuse it affected the boot processess, preventing users from logging in.|
|PUBG||PUBG (Players Unknown’s Battlegrounds) is a popular online game. One enthusiastic supporter took some off the shelf ransomware and made the unlock key dependent upon playing an hour of the game.|